[flash]

ok - so, it looks like it's time to do another round of these - for those of you who don't already know about this, do a search for "cab chassis brace", and you will see what it is all about



however, this time they will be one at a time, as the logistics and tendency of the welder to back-burner the project make batches extremely problematic



i'll work out the price over the next couple of days and get back to everybody



please send email to me (not PMs) if you want to order one

Partial Post: Please Login or Register to read the full post.

[tloof]

Hey Flash,



I saw something that you might want to consider adding onto your rollbar that was on a Mazda Miata roll bar the other day. It was a snap-on padded leather cover that really made for a nice looking installation!! I think I am going to try and buy one from Mazda or whoever makes that rollbar for the Miata.

Partial Post: Please Login or Register to read the full post.

[flash]

i thought about that when i designed this one - i opted to have the hoop as high as possible to accommodate tall drivers, so i built it extremely close to the frame



while there is clearance between the bar and the top when it is up, there is no room between the bar and the top as it goes up and down



as it stands, you would have to snap it on and off each time the top went up and down - i figured it was too much of a pain for most people, so i didn't create a pad



i will be doing something like that on the track though

Partial Post: Please Login or Register to read the full post.

[wiseman]

Flash,



Any progress?? Like you didn't have anything else to do.............LOL.

Partial Post: Please Login or Register to read the full post.

[flash]

working on getting this going now - finally getting clear of some stuff and able to focus on this

Partial Post: Please Login or Register to read the full post.

[wiseman]

Good deal!!! I'm (and I'm sure others) are patiently waiting.

Partial Post: Please Login or Register to read the full post.

[flash]

finally meeting with bender tuesday - at this time, i think i am only knocking out two of these (wiseman and sho968) - they will be one at a time - price will be set on or about tuesday, and published at that time

Partial Post: Please Login or Register to read the full post.

[wiseman]

God Bless you brother!!!!

Partial Post: Please Login or Register to read the full post.

[Sho968]

Yeeeeessss Sir!



Glad you remembered, and good thing I checked here today.



Recently got a new top and had pinion noise fixed with GT TBD.

My cab will further thank me and Flash.

Partial Post: Please Login or Register to read the full post.

[wiseman]

What did that top cost ya?? Did you get the new innnerliner also?

Partial Post: Please Login or Register to read the full post.

[Sho968]

Wiseman,



I spent $2.6k for Robbins top, headliner & installation.

The scratch resistant rear window was so clear (than I was used to anyway), I thought it was missing!



Not cheap, I know, but at least the installation was perfect and that "Economic Stimulus" check came in handy :-)

My Cab is '94, so I only have to do this every 14 years ...

Partial Post: Please Login or Register to read the full post.

[banditsc]

Ouch.. I got a German top from a CA shop on ebay for $450 and had it installed for $500.

Partial Post: Please Login or Register to read the full post.

[sksail]

Flash

Any chance of you making 3 of these? I am still very interested and I need one to do my DE events this summer/fall

Thanks

Steve

Partial Post: Please Login or Register to read the full post.

[flash]

yup

Partial Post: Please Login or Register to read the full post.

[sksail]

Flash

You Da Man!



thanks

Steve

Partial Post: Please Login or Register to read the full post.

[MrBillfll]

I am having a ppi done this week...



if things work right, I'll be wanting a rollbar for a 968 cab....



-email and pm sent....



(and hello to all on this board!)



MrBill

Partial Post: Please Login or Register to read the full post.

[PorscheDude]

Welcome Bill!

You have come to the right place!

Partial Post: Please Login or Register to read the full post.

[flash]

welcome - good timing

Partial Post: Please Login or Register to read the full post.

[flash]

ok - finally nailed down the costs and increases and such with everybody involved - basically we've seen a 20% increase in costs since the last run - new pricing:



base unit............................................. $775

x-brace................................................$210

harness bar..........................................$100

shipping packaging and handling approx $175



send me an email with your order, shipping address, and contact info - i will contact you for deposits and such



i plan to begin on this next week - i am told it will be 3-4 weeks to complete - i can't imagine doing any more of these after this - there just aren't that many cars, and it's a huge pain in the butt to do - so if you want one, this is probably the last chance - i can't promise this will be available after this run

Partial Post: Please Login or Register to read the full post.

[LES]

[quote name='flash' post='56118' date='Jul 10 2008, 07:01 AM']ok - finally nailed down the costs and increases and such with everybody involved - basically we've seen a 20% increase in costs since the last run - new pricing:



base unit............................................. $775

x-brace................................................$210

harness bar..........................................$100

shipping packaging and handling approx $175



send me an email with your order, shipping address, and contact info - i will contact you for deposits and such



i plan to begin on this next week - i am told it will be 3-4 weeks to complete - i can't imagine doing any more of these after this - there just aren't that many cars, and it's a huge pain in the butt to do - so if you want one, this is probably the last chance - i can't promise this will be available after this run[/quote]



Hi Flash,



Can we just order the x-brace and harness bar if we already have the base unit?



Lee

Partial Post: Please Login or Register to read the full post.