Posts: 473
Threads: 81
Joined: Dec 2005
Reputation:
0
Hi gang -
For a little project I'm doing, I was looking for the following specs on the 968. I'm putting together a big, comprehensive 968 Specs sheet that I will post when I'm done. Can anyone help with the following? Thanks!
-Mirror
Fuel injector maximum flow rate
Throttle Body diameter
Block deck height
Bore Spacing
Mean Connecting Rod Length
Combustion chamber volume
Reverse gear ratios for both manual and tiptronic
Curb weight, Automatic Transmission
Weight distribution, Automatic Trans.
Front Spring rate (standard and M030)
Rear Torsion bar rate (standard and M030)
Brake master cylinder piston diameter
1993 968 Coupe 6 speed, GP White, Black/Cashmere - RSBarn Catback, and chip, airbox mod, Euro turn signals, Koni's, M030 Sway Bars, KLA Strut tower brace, Zimmerman rotors, Hawk HPS, SS brake lines
Posts: 62
Threads: 6
Joined: Feb 2005
Reputation:
0
Reverse gear ratios for both manual and tiptronic:
MT: 38:11 = 3.455
AT: 2.882
Brake master cylinder piston diameter:
23.81/20.64 mm
Curb weight, Automatic Transmission:
Coupe: 3152 lbs
Cab: 3306 lbs
these are from the tech specs manual
[color="#3333FF"]Todd Jacobs [/color]
[color="#339999"]Iowa, USA[/color]
[color="#FF6600"]1993 968 coupe 6spd[/color]
[color="#000099"]Cobalt Blue [/color] with [color="#000099"]cobalt [/color] and [color="#CCCCCC"]light grey [/color] interior.
[color="#FF6666"]17" 996 wheels, Koni's, LSD.[/color]