[fred@appliedbiomechanics.com]

Can anyone tell me what these parts are? They are made from black plastic (probably ABS) about 1/8" thick and have a strip of black caulk down one side. They are embossed with PN 944.504.513.00. They were left over from one of my many repairs and mods, but I can figure out where they would go for the life of me.

I tried to cross the PN in the PET, but came up with nothing.



At this point I am very curious, and also hopeful that they are not required for an important function!

Partial Post: Please Login or Register to read the full post.

[968Oz]

When I put this number into Pelican Parts search it came back with "BLOWER COVER INSERT". Does that help?

Ian

Partial Post: Please Login or Register to read the full post.

[PorscheDude]

Did they go under the front bumper cover?

Partial Post: Please Login or Register to read the full post.

[apex]

This looks like the piece that sits directly over the wiper motor - the sheet metal is cut back below the windshield to allow removal of the motor and wiper assembly from behind the blower box - this little piece spans over the wiper motor. The thin plastic blower cover that you see at the back of the engine bay is attached below the windscreen with double-sided tape (classy detail <img src="/forum/images/smilies/968/wink.gif" class="smilie" alt="" /> ) and this plastic bridges over the gap.



Two extras of these will last several lifetimes!

Partial Post: Please Login or Register to read the full post.

[DayDreamer]

Finally... I have one left from the engine rebuild on the 944S2 and its been bugging me... also could not fine any reference to it..

thanks...

Partial Post: Please Login or Register to read the full post.

[fred@appliedbiomechanics.com]

[quote name='apex' post='59559' date='Sep 11 2008, 09:27 AM']This looks like the piece that sits directly over the wiper motor - the sheet metal is cut back below the windshield to allow removal of the motor and wiper assembly from behind the blower box - this little piece spans over the wiper motor. The thin plastic blower cover that you see at the back of the engine bay is attached below the windscreen with double-sided tape (classy detail <img src="/forum/images/smilies/968/wink.gif" class="smilie" alt="" /> ) and this plastic bridges over the gap.



Two extras of these will last several lifetimes![/quote]





Thanks for the help everybody. The car is in for a detailing and compound work on the paint. When I get her back tomorrow, I will pop the hood and see where these little rascals go. I hope to post some pictures also when I get the car back as it is now finally ready to go!

Partial Post: Please Login or Register to read the full post.