Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Removing LED Lock Pulls?
#1

Has anyone just removed the LED lock pulls and replaced them with the metal Rennline ones? The Genuine Part # 944.637.238.00 is relatively cheap, but I've had a number of these break on me. If I just remove the LED unit by unplugging it does the alarm still function properly?



I have a theory that exposed wires from the LED unit in the door have caused an excessive power drain.
Partial Post: Please Login or Register to read the full post.
Reply
#2

Never replaced them but I have re-re'd them to make sure the wiring is healthy and then epoxied them back on so the NEVER pull off again.
Partial Post: Please Login or Register to read the full post.
Reply
#3

[quote name='DaveN' timestamp='1382383954' post='151059']

Never replaced them but I have re-re'd them to make sure the wiring is healthy and then epoxied them back on so the NEVER pull off again.

[/quote]



Thanks Dave thats a good idea. I like the one and done approach and would prefer to keep the LEDs. These things just seem pretty brittle and I was curious if simply unplugging the LED unit would leave the alarm functional or if some sort or trick was needed like a resistor for the plug that runs to the cars wiring loom.
Partial Post: Please Login or Register to read the full post.
Reply


Possibly Related Threads…
Thread / Author Replies Views Last Post
Last Post by Kim
03-26-2014, 04:31 PM
Last Post by bob blackwell
02-09-2010, 10:02 PM
Last Post by mikeo
04-28-2005, 08:27 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)