[Rwinter]

I just had my doors fixed and now that the electric locks and handles are all squared away, the led lights on the lock nobs dont come on when I lock the doors. As far as I figure (and as the owner's manual says) that means the alarm is not arming, any ideas why. Id like to have something to go one when I take ti back to have them fix this error.





Thanks!!



-Rob

Partial Post: Please Login or Register to read the full post.

[flash]

does the central locking switch work?



do the dome lights work correctly?



does the glove box light work correctly?



after that, of course, check fuses



very possible that there is a pin switch open - check the glove box and all pin switches to see that they move freely and do not leave a circuit open

Partial Post: Please Login or Register to read the full post.

[Rwinter]

Everything works fine, it was working when I took it in, so I doubt its a fuse. What/where are the pin switches? Do I have to take the glove box out to get at them?



Thanks for the help!



-Rob

Partial Post: Please Login or Register to read the full post.

[flash]

open each door and such - there is a plunger type switch at each one, including the hood - the doors are in the jams - the glove box is at the latch - so is the hood



but don't discount the obvious things like the fuses - never assume anything when it comes to cars - always go back to the basics - verify voltage and ground to anything electrical before trying to diagnose some less than likely cause of a symptom

Partial Post: Please Login or Register to read the full post.

[Rwinter]

Got it! It was just the fuse, so everything is working now. Thanks for the suggestions!

Partial Post: Please Login or Register to read the full post.

[flash]

no worries - happy to help

Partial Post: Please Login or Register to read the full post.