[Rap]

Ds great idea. four doors to garage. Wonder if I can get a volume discount? lol

Partial Post: Please Login or Register to read the full post.

[Ernie]

Flash, just to confirm, the sills will be posted on the D1R website when they become available? Just checked and didn't see them yet. I don't want to miss out! <img src="/forum/images/smilies/968/clap.gif" class="smilie" alt="" />

Partial Post: Please Login or Register to read the full post.

[flash]

prototype being cut in the next couple of days for fitment check.



still need to firm up the etching numbers, and such, but i'll let everyone know when i have everything lined up and am ready to add it as a product on the D1R website.

Partial Post: Please Login or Register to read the full post.

[Duffer4126]

+1... To the list.

Partial Post: Please Login or Register to read the full post.

[flash]

i am not tracking anything from this thread. when the item is ready, an email will go out to the people who have sent an email to the above listed address.

Partial Post: Please Login or Register to read the full post.

[Rap]

I'm hoping you got mine?

Partial Post: Please Login or Register to read the full post.

[hot968]

were do I send email to get info on sills?

Partial Post: Please Login or Register to read the full post.

[94SilverCab]

Hot968...Click on D1R logo on the forums banner, send him an e-mail...



Jay

Partial Post: Please Login or Register to read the full post.

[flash]

just approved their drawing. sample being cut tomorrow or thursday. will meet with powdercoater and etcher as soon as i have it in my hand. at that point i'll have firm costs.



production time will be about 2.5 weeks.



more to follow

Partial Post: Please Login or Register to read the full post.

[Ernie]

From the number of posts and views, it seems like the sill plates have garnished a lot of attention. Well done Flash!

Partial Post: Please Login or Register to read the full post.

[flash]

no worries. when i saw that somebody was going to be basically raping the 968 guys on the ones he bought from harvey, charging over $100 for a pair, i figured i needed to do something about it.

Partial Post: Please Login or Register to read the full post.

[MCL968]

Well, you design and create great products, and you have an attention to detail that most lack.



I bet if you created some with a 944 logo, the 944 folks would snap them up. There are too few out there, and they are either shoddy or expensive; and sometimes they are both.



If you do get around to designing a chip (and I hope you do) I want to be on that list as well.

Partial Post: Please Login or Register to read the full post.

[flash]

lol - way ahead of you. already did the artwork.



re: chip - a few things to get to before i can do that, but it is on my radar now. it's not just a chip, but an entire package. be aware though that the chip will only do what is claimed if used with the other things that will be specified in the package. it won't work nearly as well if you try to use other stuff. i don't want to get into a conversation about the chip here in this thread, but basically i am taking everything i have learned about this car over the last 11 years, and putting together a package that will exceed anything thus far put out there.



back on topic - the only thing i am trying to figure out is how many 944 sills to make, as i don't have the same kind of access and notification methods with those guys as i do with the 968 guys. i really don't want to sit on a bunch of them, and i also don't want somebody else to realize that i have undercut them, and then they blow their stuff out as a result, leaving me with mine.



i'll figure it out. maybe i'll offer a group buy to them, and let somebody else collect the money, and then order them pre-paid.

Partial Post: Please Login or Register to read the full post.

[Ernie]

Curious to know what you have in mind for the chip package, Flash? I just ordered one from Pete, but I would upgrade for more ponies and torque. I'll keep an eye out for a different thread. In the meantime, looking forward to the sill plates! <img src="/forum/images/smilies/968/popcorn.gif" class="smilie" alt="" />

Partial Post: Please Login or Register to read the full post.

[MCL968]

I assume you are talking about intake modifications and exhaust modifications to coordinate and complement the chip? if so, that would be great. Your efforts to solve and balance the exhaust issues have been interesting and at times entertaining, but you seem to have it sorted out. If the exhaust and the chip worked together with either the airbox/K&N mods, the result could be a lot of bang for reasonable bucks.

Partial Post: Please Login or Register to read the full post.

[986boxster1998]

[quote name='flash' timestamp='1398864158' post='157415']

no worries. when i saw that somebody was going to be basically raping the 968 guys on the ones he bought from harvey, charging over $100 for a pair, i figured i needed to do something about it.

[/quote]



Yep, I paid $109 for some at Hersey this year and didn't realize he had a whole pile of them tucked away. In hind sight that purchase is my only real regret about the trip I got a great deal on a bunch of other parts. I'll likely order a set of the D1R sills.

Partial Post: Please Login or Register to read the full post.

[flash]

bummer. i tried to catch everybody before they went and did that.

Partial Post: Please Login or Register to read the full post.

[JTP]

I have a 944S also, I would buy a pair if you make them.

Partial Post: Please Login or Register to read the full post.

[hot968]

Please put me on the list for stainless plates

What is the warn statis on my post? Thanks, I am a sponsor

Partial Post: Please Login or Register to read the full post.

[flash]

as i have said a number of times, the "list" is of those who have emailed me at the address listed a couple of times within this thread



as has been said a number of times, the warning status meter is there on everyone, and has been for years, but you can only see yours.

Partial Post: Please Login or Register to read the full post.