[Kim]

Does anyone know what the correct offset should be for a 16 inch x 9 inch wide wheel? Mine says 9/70 on the wheel near the valve stem but it seems to sit too far inboard. In know that the correct offset for an 7 inch wheel is 55 m and for an 8 inch wheel is 52 mm.



If it is about 45-50 mm what do you think about adding a 20 mm bolt-up spacer to move the wheels out a bit?

Partial Post: Please Login or Register to read the full post.

[flash]

a 20mm spacer will absolutely REQUIRE replacing the studs with longer ones, unless you get the bolt-on type



this will also add a significant amount of weight to the wheel, and will require balancing independent of the wheel, unless you get the bolt on type (which adds even more weight)

Partial Post: Please Login or Register to read the full post.

[Kim]

        [attachment=2575:attachm

ent][ATTACHMENT NOT FOUND]Bought spacers last week from paragon - they were delivered today. Got the 28 mm spacers with independent bolts. Before and after pics attached. may be only my imagination but car is now quiter in back end.

Partial Post: Please Login or Register to read the full post.