[doster]

I m trying to remove the rear hubs and its not as easy as the 944 do i need a puller and do the bearings come out with the hub?

Partial Post: Please Login or Register to read the full post.

[banditsc]

[quote name='doster' post='42919' date='Oct 26 2007, 07:59 PM']I m trying to remove the rear hubs and its not as easy as the 944 do i need a puller and do the bearings come out with the hub?[/quote]

Have you looked at Clarks? http://www.clarks-garage.com/shop-manual/susp-11.htm

Partial Post: Please Login or Register to read the full post.

[doster]

No i didn't but just figured it out, you need a puller <img src="/forum/images/smilies/968/smile.gif" class="smilie" alt="" /> Just wanted to make sure so i didn,t screw anything up Thanks though.

Partial Post: Please Login or Register to read the full post.

[968workaholic]

The inner race of the bearing will come out when you take the hub off. As for the outer race, you need to heat up the housing with a torch to get it out. Go from the back with a large socket, around 26mm, and whack away. It should come out if the housing is hot enough. Be sure to take your abs sensor out or you will cook it.

Partial Post: Please Login or Register to read the full post.

[doster]

Thanks workaholic Its like a chinese puzzel once you figure it out its easy <img src="/forum/images/smilies/968/smile.gif" class="smilie" alt="" />

Partial Post: Please Login or Register to read the full post.

[FRporscheman]

Easy... hmph. You have my props! I love working on cars, but doing the rear wheel bearings on my 944 was one job I completely hated. The fronts were fun though.

Partial Post: Please Login or Register to read the full post.

[doster]

lol: I didn't say the bearings were easy, just getting the hubs off. I did the bearings on my 944 and it

sucked but the hubs slide right off, on the 968 the hubs are a little tougher but the bearings are easier.

Partial Post: Please Login or Register to read the full post.

[flash]

that is how i described i thought it was when we talked - glad to know i'm not nuts

Partial Post: Please Login or Register to read the full post.

[doster]

[quote name='flash' post='43014' date='Oct 30 2007, 05:50 AM']that is how i described i thought it was when we talked - glad to know i'm not nuts[/quote]



I wouldn't say that <img src="/forum/images/smilies/968/laugh.gif" class="smilie" alt="" /> But ya thats how it was, thanks for the help!

Partial Post: Please Login or Register to read the full post.