[davec]

Hi All,



Ground Control is making some Bilstein struts for me. They have done 944's, but apparently this is their first 968. They need a used strut to make sure the air scoop mount is in the correct position. Can someone stop by and let Jay measure it, or supply him with a used strut?



Thanks!



DaveC

Partial Post: Please Login or Register to read the full post.

[TheMirror]

Sure Dave -



I can let him measure my car, no problem. Will it require strut removal? Just curious.



I'm in Sacto, PM me when you get a chance.



Best,



-R



[quote name='davec' date='Oct 4 2006, 09:07 AM']Hi All,



Ground Control is making some Bilstein struts for me. They have done 944's, but apparently this is their first 968. They need a used strut to make sure the air scoop mount is in the correct position. Can someone stop by and let Jay measure it, or supply him with a used strut?



Thanks!



DaveC

[right][post="26625"]<{POST_SNAPBACK}>[/post][/right][/quote]

Partial Post: Please Login or Register to read the full post.

[EEZATOY]

DaveC,



I see Mirror has already volunteered his car...



You also might want to drop Silver BLT (aka Ron) an e-mail (I haven't seen him on the boards for a while) - he's in the El Dorado Hills area. IIRC he did the Koni replacement an might still have his old struts lying around...



Sam

Partial Post: Please Login or Register to read the full post.

[davec]

Thanks all! I don't know Ron, but if you are out there, please chime in.



Dave C





[quote name='EEZATOY' date='Oct 4 2006, 02:28 PM']DaveC,



I see Mirror has already volunteered his car...



You also might want to drop Silver BLT (aka Ron) an e-mail (I haven't seen him on the boards for a while) - he's in the El Dorado Hills area. IIRC he did the Koni replacement an might still have his old struts lying around...



Sam

[right][post="26632"]<{POST_SNAPBACK}>[/post][/right][/quote]

Partial Post: Please Login or Register to read the full post.

[bob blackwell]

I doubt it, the old struts are modified to accept the Koni inserts and then put right back on the car. Usually the original struts are shipped in to offset the cost of the modified struts with inserts. Good luck, Bob Blackwell.

Partial Post: Please Login or Register to read the full post.

[TheMirror]

All set for 2pm tomorrow, Dave! Sent you a PM.



Cheers,



-Mirror

Partial Post: Please Login or Register to read the full post.

[peartree]

The Ground Control Koni kit looks like a pretty good deal. Anyone running this setup?



Dave C - is there a reason you went with (what sounds like) a custom Bilstein setup? By the way, how did it turn out?

Partial Post: Please Login or Register to read the full post.