Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I need a new glove box cover
#21

Since I have had the tiptronic I never bothered to measure the glove compartment box to see if it's just my imagination or if it is really smaller than the one in my six speed. It certainly looks smaller at least height-wise, and maybe even length, but as I said I could be simply imagining things.. Furthermore, even the door pockets on the tip seem narrower, although that could be a factor of the six speed's PO having stored a bunch of things in there which enlarged / extended the pockets enough for them to stay slightly roomier..

I'm going to measure the damn things today just to satisfy my curiosity and will report the results here . Hey, these cars were " hand made " so I would not be entirely shocked if there are differences of 1/8" or 1/2" or more on non-engine components ..
Partial Post: Please Login or Register to read the full post.
Reply
#22

Are you talking about the center console lid?
Partial Post: Please Login or Register to read the full post.
Reply
#23

no, the box under the dash .  measured it this morning - it's about 1/2 " shorter ( height ) than the one in the six speed, and it seems to be mounted well, flush with all the outer edges, etc so it's possible it may be collapsed or pressed somehow.   the side pockets are also about 1/8" narrower, but I suspect the reason i mentioned earlier is probably the cause for that..         

Partial Post: Please Login or Register to read the full post.
Reply
#24

It is different if you have one or two air bags
Partial Post: Please Login or Register to read the full post.
Reply


Possibly Related Threads…
Thread / Author Replies Views Last Post
Last Post by Jmb
03-28-2021, 12:50 PM
Last Post by Trueblue
02-09-2019, 04:05 PM
Last Post by plittell
07-26-2017, 12:05 PM
Last Post by flash
01-06-2017, 03:09 PM
Last Post by MCL968
07-27-2016, 02:44 PM
Last Post by gbarrier
07-08-2016, 09:45 AM
Last Post by kwikt
06-26-2016, 09:24 PM
Last Post by MCL968
04-08-2016, 11:11 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)