[kwikt]

Looking for a good clutch fork shaft for 92 968. Hopefully someone has one. Thanks <img src="/forum/images/smilies/968/smile.gif" class="smilie" alt="" />



Kevin

Partial Post: Please Login or Register to read the full post.

[PorscheDude]

I think it is less than $30 new, get the bearings that go with it while you are ordering.

Partial Post: Please Login or Register to read the full post.

[xrad]

You can press out the old bearings with right size socket on a bench vise. And then press in the new ones. Go slowly as you don't want to damage them. Use some marine blue grease to lube.

Partial Post: Please Login or Register to read the full post.

[kwikt]

I see Paragon sells the whole hardware kit for $149(shaft, bearings, bolts, etc.).



Kevin

Partial Post: Please Login or Register to read the full post.

[PorscheDude]

968's seem to to be a little rougher on the clutch pivot rod and bearings.

Best to buy new. It very simple to replace the bearings, as X said, tap them out using the appropriate size socket and hammer. Use caustion with the fork, if you tweek it, it's not cheap.

Partial Post: Please Login or Register to read the full post.

[kwikt]

Yep.... ordered a new one today along with flywheel, clutch disc, throw out bearing, bolts etc. Actually a pretty simple job!!!!



Kevin

Partial Post: Please Login or Register to read the full post.