Kokeln Control Arms - Printable Version
+- 968Forums.com (
https://968forums.com/forum)
+-- Forum: RAISING MY 968 - The Modifying, Care & Feeding (
https://968forums.com/forum/raising-my-968-the-modifying-care-feeding)
+--- Forum: REV IT UP (
https://968forums.com/forum/rev-it-up)
+---- Forum: Handling and Suspension (
https://968forums.com/forum/handling-and-suspension)
+---- Thread: Kokeln Control Arms (
/kokeln-control-arms.html)
Kokeln Control Arms -
Jason Judd - 03-11-2007
Guys,
Decided to replace my stock control arms with the Kokeln setup...
Anybody know if they are much lighter?
They certainly make camber adjustments easier.
Jason
PS: Anybody interested in some fairly new control arms...about 3 years old.
Jason
Kokeln Control Arms -
Anchorman - 03-12-2007
Jason, I could be interested. If you'd like, you can email me.
Thanks, Jim
Kokeln Control Arms -
pazzer - 03-25-2007
hi jason, have you got your a-arms, its just that i have ordered some from pete at rs barn, and they seem to be taking forever to arrive, kokeln told me there seems to be a problem with the pins or something and they are testing them at the moment, be good to hear if you have yours, was initially going to have charlies but they are like rocking horse s***, so i went with kokeln to complement the rear delete i am running, regards pazzer <img src="/forum/images/smilies/968/cool.gif" class="smilie" alt="" />
Kokeln Control Arms -
Miles'PHTurbo968 - 03-25-2007
I also ordered a set from Pete at RS Barn. I chose the Racer's Edge model. I got them about a month or so ago. I installed them and took my car to the mechanic to have the engine swapped out. Then the Racer's Edge A-arms got recalled. So now I have to uninstall them and send them back. So I haven't even had a chance to drive on them........
Kokeln Control Arms -
Jason Judd - 03-25-2007
Miles, that really sucks...sorry to hear about that. I know Karl is trying very hard to make good on all the problems with his control arms.
Pazzer, my Kokeln arms are in and look great! I wasn't sure if you were asking about the availability of my stock arms...my appologies.
Jason
Kokeln Control Arms -
pazzer - 03-25-2007
i take it you had no delay with the order then jason, i must phone them again to see whats happening, as the trackday season is soon upon us over here, and i want the car ready, regards chris <img src="/forum/images/smilies/968/cool.gif" class="smilie" alt="" />
Kokeln Control Arms -
RS Barn - 03-26-2007
Jason,
Give me a shout tomorrow. I have a question about your Arms
Pete