968Forums.com

Appears that the clock, lighter, and outside temp gauge are all on fuse #15. The outside temperture gauge works but has defaulted to celceius.

Fuse #15 is good. But just in case I replaced it with a new one.



Puzzling to me that the lighter, clock, and outside temperture gauge are on the same fuse and one has power and two do not.



Any ideas?

Thanks and have a great day,

Ed

Fuse 11 is the one that will cause the temp to go Celsius all the time, not fuse 15.



If replacing the fuse does not work, check the wiring. According to the wiring diagram, you should have +12V on pin 1. If everything else is working, I suspect you're not getting voltage there.

Jon, #11 was it thanks!

[quote name='edsteve' date='May 24 2006, 10:18 PM']Jon, #11 was it thanks!

[right][post="21643"]<{POST_SNAPBACK}>[/post][/right][/quote]

Sweet! You're welcome!

This is what exactly one of the things this Forum is all about - well done, folks.